Shopping Cart

Sekurus OBD II

The SEKURUS OBD II is a vehicle tracking device that plugs into a vehicle’s OBDII port. Its compact design allows easy installation. Its internal OBD reader can obtain information from the vehicle’s on-board computer and relay it over the networks. Its built-in GPS receiver has superior sensitivity and fast time to first fix. Its Quad band allows the SEKURUS OBD II ‘s location to be monitored in real time or periodically tracked by a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection.SEK-OBD-II GPS is a multifunctional product.

It is an integration of GPS tracking system, RFID Vehicle Personal Identification immobilizer Security system & OBD-II Diagnostic system. System integration is straightforward as complete documentation is provided for the full featured protocol. The protocol supports a wide variety of reports including emergency, geo-fence boundary crossings, low battery and scheduled GPS position.

General Specifications

Dimensions 55.0 x 51.5 x 28.5(mm)
Weight About 73g
Backup Battery Rechargeable 3.7V 200mAh Li-ion battery
Operating Voltage +6.0 ~+45VDC/1.5A
Operating Temperature and Humidity -200C ~ +800C (without battery)
-400C ~ +850C for storage (without battery)0 ~ 95%
Data logger 8Mb for offline GPS waypoint

GSM Specifications

Frequency Quad-band: 850MHz/900MHz/1800MHz/1900MHz
Max Out RF Power 23~25dBm
Min Out RF Power < -50dBm
Dynamic Input Range -25~-110dBm
Receiving Sensitivity BC0:-110dBm
BC1:-107dBm

Advantages:

  • OBDII connectivity, easy to install
  • Quad band frequencies 850MHz/900MHz/1800MHz/1900MHz
  • Wide operating voltage range +6.0 ~+45VDC/1.5A
  • Internal u-blox chipset
  • Embedded full featured protocol
  • Internal 3-axis accelerometer for power saving and motion detection Internal antenna
  • Internal GPS antennas, automatically use the one with better signal FCC/CE certified module.

Interfaces

  • OBDII Port Allow information to be read from OBDII port and provide device power. Support legislated OBDII protocolsSAE J1850 PWM,SAE J1850 VPW,ISO 9141-2,ISO 14230-4 KWP,ISO 15765-4 CAN ,SAE J1939 CAN.
    GSM Antenna Internal only
    GPS Antenna Internal only
    Indicator LED CEL and GPS
    RFID Keyless Identification 2.4 GHz RFID Technology
    Bluetooth Bluetooth® Smart 2.4 GHz
    Immobilizer(Optional) Disable the starter/ fuel Pump (speed configurable) Supports multi wireless anti-Tamper relay installation
    Mini USB Port Mini USB port for upgrading
    Speed accuracy <0.1M/S (wide-open area)